Coordinating supply across Southeast Asia from Singaporesales@grenglo.com

Electrical guides · 17 October 2026

Industrial LED High-Bay Lighting RFQ Checklist: Photometry, IP/IK & Compatibility

An industrial LED high-bay luminaire should be quoted against the approved lighting design and operating environment, not selected by wattage alone. For Singapore factories, workshops, logistics centres and high-ceiling facilities, a clear lighting schedule allows suppliers to check photometric performance, electrical compatibility, mounting, controls and documentation. This is a procurement checklist, not a lighting-design calculation or installation approval.

1. Start with the lighting-design information

Before requesting a high-bay quotation, provide the intended application, working-plane activities, relevant layout drawings, mounting height, fixture locations, maintenance access and any design constraints. Ask the appointed lighting designer or project engineer to specify the required maintained illuminance, uniformity, glare-control approach and emergency-lighting arrangements where applicable. Do not assume that equal wattage or an advertised lumen value produces equivalent illumination on the working plane.

2. Request a manufacturer’s photometric file

Ask for the proposed exact model reference and optic/distribution variant, together with a manufacturer-issued IES or EULUMDAT/LDT file where available. Photometric files support lighting-layout calculations; a product brochure or nominal lumen figure alone cannot demonstrate suitable coverage, uniformity or glare for a specific project.

Confirm the rated luminaire output, input power, efficacy, colour temperature (CCT), colour rendering index (CRI), optical distribution and photometric test information directly from the proposed model’s manufacturer datasheet. These are product-dependent, not generic Grenglo specifications.

3. Match environmental and mechanical conditions

  • Installation environment: indoor workshop, warehouse, dusty factory, humid/coastal location, washdown area or another declared location.
  • Ingress protection: request the manufacturer-declared IP rating and associated test evidence appropriate to the environment; IEC 60529 concerns enclosure ingress protection.
  • Impact protection: where mechanical impact is a design concern, request an IK rating with the applicable evidence; IEC 62262 concerns protection against external mechanical impacts. IP and IK assess different hazards.
  • Temperature and contamination: verify the manufacturer’s operating ambient range, thermal-management restrictions and any exposure to chemicals or corrosive vapours.
  • Hazardous locations: ordinary industrial high-bay luminaires are not automatically suitable for classified hazardous areas. Such applications require project-specific Ex classification and independently verifiable certification.

4. Check supply, controls and installation interfaces

State the approved supply voltage and frequency, earthing arrangement, connection method, power-quality conditions, upstream protection and any required surge protection. Confirm driver compatibility with the intended control system, including switching, sensor integration or dimming protocol if specified. Ask for surge-immunity and electrical test information rather than assuming that every LED driver has the same capability.

For installation, check the approved suspension or bracket type, fixture weight, fixing design, available clearances, access for maintenance and installation instructions. Any substitution must be assessed for both lighting performance and mechanical/electrical compatibility.

5. Ask for verifiable lifecycle and compliance evidence

Request the actual manufacturer’s product datasheet, installation manual, product identification, relevant safety/conformity documents, photometric file, declared operating temperature, warranty terms and any claimed life or lumen-maintenance supporting documentation. Stated lifetimes and warranty terms vary by model and operating conditions; they should not be invented or transferred from a different model.

Standards check: IEC 60598-1:2024 provides general luminaire safety requirements. The applicable particular part of IEC 60598 should be determined for the exact luminaire and intended application; for fixed general-purpose luminaires this may include IEC 60598-2-1:2025. IEC 60529 and IEC 62262 address enclosure IP and IK classification respectively. Referencing a standard in an RFQ is not proof that a specific product complies with it.

6. Industrial LED high-bay RFQ schedule: ten useful fields

  1. Location and use: building, bay or equipment area; intended operating activity.
  2. Drawings and mounting: layout, mounting level, bracket/suspension details and access restrictions.
  3. Lighting design: approved required performance and whether the IES/LDT file will be used in a project lighting calculation.
  4. Luminaire identity: requested OEM model/part number, or defined performance requirements for an approved alternative.
  5. Optics and colour: required distribution, CCT, CRI and any project-defined glare requirements.
  6. Electrical interface: approved supply, driver, controls, switching and protection conditions.
  7. Environment: required IP/IK evidence, ambient conditions, corrosive/dusty/wet exposure and hazardous-area classification if applicable.
  8. Mechanical interface: installation method, accessories, weight and any fitting or cable-gland requirements.
  9. Compliance and documentation: applicable project standards, datasheet, reports, photometric files, installation instructions and warranty evidence.
  10. Commercial BOQ: quantities per model, delivery location, required date, packing/handling constraints, lead time and quotation validity.

Example wording for a quotation request

“Please quote industrial LED high-bay luminaires against the attached approved lighting schedule and drawings. Identify each exact manufacturer model and optical variant; provide the manufacturer datasheet, IES/LDT photometry where available, installation instructions, applicable IP/IK and electrical compliance evidence, warranty terms, accessories, packing, lead time and delivered quotation. Any alternative must be separately identified and is subject to the client’s written technical approval.”

Manufacturer reference: confirm model-specific files

As an illustration of the evidence buyers can request, Signify Singapore’s official Philips high-bay product page provides manufacturer documents and an IES photometry download for its identified model. This reference is solely an example of manufacturer documentation, not a claim that Grenglo stocks, distributes, represents, or is authorised by Signify or Philips.

Request industrial lighting quotations in Singapore

Grenglo Energy Pte Ltd supports industrial electrical supply and project sourcing enquiries from Singapore and selected Southeast Asian markets. Review our industrial lighting and high-bay sourcing category and submit your project BOQ or luminaire schedule for quotation. Grenglo can review available supplier options against submitted requirements; product availability, technical acceptance, documentary compliance, pricing and delivery must be confirmed for each enquiry.

Source checks: IEC 60598-1:2024; IEC 60598-2-1:2025 (where applicable); IEC 60529:1989+A1:1999+A2:2013; IEC 62262:2002+A1:2021; and Signify’s model-specific manufacturer documentation. Editorial review: 15 October 2026. The applicable project and Singapore regulatory requirements must be confirmed by a competent professional.

Have a BOQ or a part number?

Send it as it is: a spreadsheet, a PDF schedule or a nameplate photo. We will come back with clarifying questions or a line-by-line quotation.